HEIDENHAIN TNC 620 User Manual page 490

12
12.1 Machine-specific user parameters
Application
The parameter values are entered in the configuration editor.
Refer to your machine manual.
The machine tool builder can make additional
machine-specific parameters available as user
parameters, so that you can configure the functions
that are available.
The machine tool builder can adapt the structure and
contents of the user parameters. The display on your
machine may be different.
The machine parameters are grouped as parameter objects in a
tree structure in the configuration editor. Each parameter object has
a name (e.g. Settings for screen displays) that gives information
about the parameters it contains.
Calling the configuration editor
Proceed as follows:
Press the MOD key
Select the Code-number entry function, if
necessary
Enter the code number 123
Confirm with the ENT key
The control displays the list of available
parameters in the tree view.
490
Tables and overviews | Machine-specific user parameters
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022