6
View options
Display the VIEW OPTIONS as follows:
Select the desired operating mode
Press the VIEW OPTIONS soft key
The available soft keys depend on the following settings:
The selected view
You can select the view with the VIEW soft key.
The selected model quality
You can select the model quality in the Graphic settings group of
the MOD menu.
The control provides the following VIEW OPTIONS:
Soft key
Function
Show the workpiece
Show the tool
Further information: "Tool", Page 250
Show the tool paths
Further information: "Tool", Page 250
Select the view
Further information: "View", Page 251
Reset the tool paths
Reset the workpiece blank
Show the workpiece blank frame
Highlight the workpiece edges on 3-D model
Show the STL file of the finished part
Further information: User's Manual for Klartext
Programming or ISO Programming
Show the block numbers of the tool paths
Show the end points of the tool paths
248
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
Testing and running | Graphics (option 20)