HEIDENHAIN TNC 620 User Manual page 395

Setup, testing and running nc programs

Hide thumbs Also See for TNC 620:

Table of Contents

HEROS functions | Window manager

Configuring the control

To adjust the firewall settings:

The State Reporting Interface uses TCP Port 19090 to transfer the

acquired operating states.

Accesses to the SRI from the company network (X26 connection)

must be permitted in the firewall settings.

Further information: "Firewall", Page 402

If the SRI is accessed locally via an IPC connected to the

machine network (X116), eth0 (X26) can also remain

In the control's factory default setting, the SRI is deactivated.

To activate the State Reporting Interface:

Open the task bar at the bottom edge of the screen

Press the green HEIDENHAIN button to open the HEROS menu

Select the Settings menu item

Select the State Reporting Interface menu item

Activate the State Reporting Interface in the SRI pop-up window

Further information: "Overview of taskbar", Page 385

To clear all previous operating states, use the

Clear historical data button.

HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022

Tnc 620 e Tnc 620 programming station