Tools | Tool management
Importing and exporting tool data
Importing tool data
Refer to your machine manual.
The machine tool builder can define update rules that
make it possible, for example, to automatically remove
umlauts from tables and NC programs.
Using this function you can simply import tool data that you have
measured externally on a presetting device, for example. The file to
be imported must have the CSV format (comma separated value).
CSV files are text files designed for the exchange of data with a
simple structure. Accordingly, the import file must have the following
structure:
Line 1: In the first line you define the column names in which the
data defined in the subsequent lines is to be placed. The column
names are separated with a comma.
Other lines: All the other lines contain the data that you wish
to import into the tool table. The order of the data must match
the order of the column names in Line 1. The data is separated
by commas, decimal numbers are to be defined with a decimal
point.
Follow the steps outlined below for importing:
Copy the tool table to be imported to the TNC:\system\tooltab
directory on the hard disk of the control
Start expanded tool management
Press the TOOL IMPORT soft key in tool management
The control shows a pop-up window with the CSV files that are
saved in the TNC:\system\tooltab directory
Use the arrow keys or mouse to select the file to be imported and
confirm with the ENT key
The control shows a pop-up window with the content of the CSV
file
Start the import procedure with the EXECUTE soft key.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
4
157