HEIDENHAIN TNC 620 User Manual page 424

10
Tab Setting
Server and
Share
Automount Connect automatically (not possible with the
"Ask for password?" option)
The control connects the network drive automati-
cally during the starting process.
User
name and
password
(only with
Windows
share)
Mounting Parameters for mount option "-o":
options
Auxiliary parameters for the connection
The control displays a summary of the defined
Check
settings.
You can check the settings and save them with
Apply.
424
Server name:
Server name or IP address of network drive
Share name:
Designation used to share the folder accessed
by the control
Single Sign On
When user administration is active, the control
automatically connects an encrypted network
drive when the user logs in.
Windows user name:
Ask for password? (not possible with the
"Connect automatically" option)
Select whether a password is required upon
connecting.
Password
Password verification
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
HEROS functions | Ethernet interface