Modes Of Operation; Manual Operation And El. Handwheel; Positioning With Manual Data Input; Programming - HEIDENHAIN TNC 320 User Manual

2.3

Modes of Operation

Manual Operation and El. Handwheel

The Manual Operation mode is required for setting up the machine
tool. In this mode of operation, you can position the machine axes
manually or by increments, set the datums, and tilt the working
plane.
The El. Handwheel mode of operation allows you to move the
machine axes manually with the HR electronic handwheel.
Soft keys for selecting the screen layout (select as described
previously)
Window
Positions
Left: positions, right: status display

Positioning with Manual Data Input

This mode of operation is used for programming simple traversing
movements, such as for face milling or prepositioning.
Soft keys for selecting the screen layout
Window
Program
Left: program blocks, right: status display

Programming

In this mode of operation you can write your part programs.
The FK free programming feature, the various cycles and the
Q parameter functions help you with programming and add
necessary information. If desired, you can have the programming
graphics show the programmed paths of traverse.
Soft keys for selecting the screen layout
Window
Program
Left: program, right: program structure
Left: program, right: programming graphics
TNC 320 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
Modes of Operation
Soft key
Soft key
Soft key
2
2.3
67