Opening A New Program/File Management - HEIDENHAIN TNC 620 User Manual

1
First Steps with the TNC 620
1.3 Programming the first part

Opening a new program/file management

Press the PGM MGT key: The TNC opens the
file manager The file management of the TNC is
arranged much like the file management on a PC
with the Windows Explorer. The file management
enables you to manage data on the internal
memory of the TNC
Use the arrow keys to select the folder in which
you want to open the new file
Enter any desired file name with the extension .H
Confirm with the ENT key: The control asks you
for the unit of measurement for the new program
Select the unit of measure: Press the MM or INCH
soft key
The TNC automatically generates the first and last blocks of the
program. Afterwards you can no longer change these blocks.
Further information on this topic
File management
Further Information:
page 120
Creating a new program
Further Information:
page 105
56
Working with the file manager,
Opening programs and entering,
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015