Ricoh MP C6502SP Field Service Manual page 1135

Hide thumbs Also See for MP C6502SP:

Table of Contents

Error Name/Error Condition/Major Cause/Solution

Sensor 1: Heating Roller Center Disconnection

0 degrees or lower was detected for (t1) seconds consecutively.

Number of times: 10 or more

D135 (Japan): 50 (seconds)

D136 (Japan)/D135 (NA): 50 (seconds)

D136 (NA)/D135 (EU)/D136(EU): 50 (seconds)

D137 (Japan): 50 (seconds)

D138 (Japan)/D137 (NA)/D138 (NA)/D137 (EU)/D138 (EU): 50

Monitored at: All times, though SC is not issued when temperature is not

controlled (when in off mode/sleep mode, when a door, excluding the

toner supply door, is open, or when the heater relay is off).

• Thermopile disconnection

• Connecter contact failure

• Replace the thermopile.

• Reconnect the connector.

• Replace the connector.

Service Call 501-595

Chapters

Table of Contents