Ricoh MP C6502SP Field Service Manual page 1445

D137/D138:
Increase the value of Toner Adhesion in the IMSS setting.
No.
33
34
35
36
Troubleshooting for Density unevenness and dust when using AC transfer (Pro
C5110S /Pro C5100S)
Symptom / Cause
Symptom
Toner is not
transferred to the
indentations on
texture paper.
Toner accumulates
and density is too
high in the
indentations on
texture paper.
IMSS setting
Adjust Toner Adhesion (Black)
Adjust Toner Adhesion (Cyan)
Adjust Toner Adhesion (Magenta)
Adjust Toner Adhesion (Yellow)
Example
Image Quality
Cause
• Surface of the
paper is rough.
• PTR voltage is too
low.
• Surface of the
paper is rough.
• PTR voltage is too
high.
1443