Modification Procedure For Original Transport; Replacing Parts Of The Adf - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

4. Replacement and Adjustment

*The tip of the seal is cut at an angle. Its tip faces the front [B].

• When replacing an ADF exposure glass, replace with a new exposure glass seal and a gap

sheet as well.

• ADF Exposure Glass (D137/D138): Same as for D135/D136, except there is no gap sheet.

Modification Procedure for Original Transport

For D135/D136, if you change from contact transport to non-contact transport, it is necessary to

replace parts of the scanner unit and the ADF.

1. Open the ADF

2. Entrance lower guide unit [A] ( x 2).

• Entrance lower guide unit for non-contact transport: the following areas are black [A].

• Entrance lower guide unit for contact transport (part number: D6833401): the following

areas are clear and colorless [B].

Table of Contents