Ricoh MP C6502SP Field Service Manual page 1453

Illustration of paper size
1: Feed direction
2. Set SP1-121-003 (Switch:Rotation Start/Stop: Time:After Job) to a value of "100 sec".
Pro/Office
Pro/Office
3. Feed paper in the same way as when the problem occurred.
4. If the symptom still occurs, set SP1-121-003 (Switch:Rotation Start/Stop: Time:After Job) to a
value of "180sec" and check the results.
5. If the symptom still occurs, set SP1-121-003 (Switch:Rotation Start/Stop: Time:After Job) to a
value of "240sec" and check the results.
6. If the symptom still occurs, set SP1-121-003 (Switch:Rotation Start/Stop: Time:After Job) to a
value of "300sec" and check the results.
Troubleshooting blurred image on front and rear sides toward the Trailing Edge
Symptom
Image on both front (operator) and rear (non-operator) sides toward the trailing edge is blurred.
SP No.
SP2-121-003 Switch:Rotation Start/Stop:
Time:After Job
SP Name
0 to 300
Image Quality
Value
1451