Ricoh MP C6502SP Field Service Manual page 1121

Hide thumbs Also See for MP C6502SP:

Table of Contents

Error Name/Error Condition/Major Cause/Solution

LCT Tray Error (Paper Overload Error): D709

During tray initialization, the upper limit sensor and the lower limit sensor

were both on for 5 times consecutively.

• Paper overloaded.

• Upper limit sensor defective/connecter disconnected

• Lower limit sensor defective/connecter disconnected

• Related harness broken

• PCB defective

• Reduce loaded paper.

• Replace or reconnect the upper limit sensor.

• Replace or reconnect the lower limit sensor.

• Replace the corresponding harness.

• Replace the PCB.

Error Name/Error Condition/Major Cause/Solution

LCT Tray Error (Upper Limit Detection Error): D710

At the start of tray initialization, the upper limit sensor was detected as

being off for 5 times before the pick-up solenoid was on.

• Pick-up solenoid defective/connecter disconnected