Ricoh MP C6502SP Field Service Manual page 1403

Condition 1: Printing on HML
A3 after printing 10kp of full-
bleed solid on HMLSRA3
• Effect will differ depending on the paper in use and job conditions.
Solution (D135/D136)
Polish the edges on the fusing belt using the tool in the following table.
See procedure below.
New P/N
M077428
WEB:POLISH:FUSING:ASS'Y
7
[A]: M0774287 WEB:POLISH:FUSING:ASS'Y
Procedure for Polishing the Fusing Belt
1. Pull out the drawer unit.
Condition 2: One smoothing
operation (3 min) after
"Condition 1"
Description Q'ty
Condition 3: Two smoothing
operations (6 min) after
"Condition 2"
Int Page
1 - -
Image Quality
Index Note
- -
1401