Ricoh MP C6502SP Field Service Manual page 1365

Reference Information-3 (Step 4. Image Adjustment for back)
1. Do the following calculation:
(average [B2] - (average [A2])/2 = x
(average [C2]) - (average [D2])/2 = y
2. Make an adjustment in the same way as front image position adjustment.
3. Make a print out and check it.
If you can't solve the magnification problem, repeat steps 1 to 3.
Pro/Office
SP
SP
For IMSS
Pro
IMSS
IMSS
SP
SP
Reference Information-4 (Step 5. Adjustment of magnification for back)
1. Do the following calculation:
average [A3]/average [B3]-1 = A
average [C3]/average [D3]-1 = C
2. Add A to the current values in SP2102-043. (If IMSS, SP2952)
3. Add C to the current values in SP2102-044. (If IMSS, SP2953)
4. Make a print out and check it.
If you can't solve the magnification problem, repeat steps 1 to 4.
Number
SP1-003-006 Side-to-Side Reg (Duplex)
SP1-001-003 Lead Edge Reg (Duplex)
Number
Adjust Image Position of Side
09
2 Across Feed Direction
Adjust Image Position of Side
07
2 With Feed Direction
S-to-S Regist Adj (Rear) (Each
SP1-953-XXX
Custom papers)
L-Edge Regist Adj (Rear) (Each
SP1-951-XXX
Custom papers)
Description
±3.0mm
±9.0mm
Description
±3.0mm
±9.0mm
±3.0mm
±9.0mm
Adjustment
Adjustment Area
Adjustment Area
1363