Paper Tray Lift Motor - Ricoh MP C6502SP Field Service Manual

3. Pull out the paper trays from the front side of the machine and remove the two paper tray set
sensors [A].

Paper Tray Lift Motor

1. PFB along with the bracket, located on the back side of the machine (
removing the motors that are behind the PFB")
2. PSU1 / PSU2 along with the bracket, located on the back side of the machine (
"When removing the motors and sensors that are behind the PSU1/PSU2")
3. Paper feed motor for paper tray 2 or paper feed motor for paper tray 3 (
Paper Feed Motor/2nd Transport Motor, 3rd Paper Feed Motor/3rd Transport Motor")
4. Tray pull-in device [A] ( x 3)
e.g.: for paper tray 2
Paper Feed Section (Tray 2-3 / Vertical Transport)
page 941 "When
page 944
page 973 "2nd
847