Ricoh MP C6502SP Field Service Manual page 1460

Hide thumbs Also See for MP C6502SP:

Table of Contents

5. Troubleshooting

Clean the heat pipe unit.

See Procedure below.

1. Remove the fusing unit.

2. Open the separation unit [A] and remove the heat pipe unit [B] (5 screws).

3. Remove the toner stuck to the heat pipe rollers using sandpaper (#1500).

• Move the sandpaper back and forth horizontally and rotate the heat pipe roller to clean

it full-circle.

4. Wipe the places that you sanded in Step 3 with a damp cloth.

Chapters

Table of Contents