Ricoh MP C6502SP Field Service Manual page 1351

SP1102
setting
0 1200dpi 2bit Photo Gamma
1 1200dpi 1bit Photo Gamma
2 600dpi 4bit Photo Gamma
3 600dpi 2bit Photo Gamma
4 600dpi 1bit Photo Gamma
5 1200dpi 2bit Text Gamma
6 1200dpi 1bit Text Gamma
7 600dpi 4bit Text Gamma
8 600dpi 2bit Text Gamma
9 600dpi 1bit Text Gamma
5. Compare the IDmax patch pattern on the C-4 test chart for each color and the corresponding
patch pattern on the Color Gray Scale printed with SP1103-001. (If no adjustment is
required, go step #8).
See NOTE 3 about the corresponding patch pattern.
6. Adjust the IDmax for CMYK with SP1104 (Gamma Adjustment) and save the adjusted value
with SP1105 (Save Toner Control Value).
7. Print out the Color Gray Scale pattern with SP1103-001 again.
8. Compare the Middle (M) patch pattern on the C-4 test chart for each color and the
corresponding patch pattern on the Color Gray Scale printed with SP1103-001. (If no
adjustment is required, go step #11).
See NOTE 3 about the corresponding patch pattern.
9. Adjust the Middle (M) for CMYK with SP1104 (Gamma Adjustment) and save the adjusted
value with SP1105 (Save Toner Control Value).
10. Print out the Color Gray Scale pattern with SP1103-001 again.
11. Compare the Shadow (S) patch pattern on the C-4 test chart for each color and the
corresponding patch pattern on the Color Gray Scale printed with SP1103-001. (If no
adjustment is required, go step #14).
See NOTE 3 about the corresponding patch pattern.
12. Adjust the Shadow (S) for CMYK with SP1104 (Gamma Adjustment) and save the adjusted
value with SP1105 (Save Toner Control Value).
Mode to be adjusted Note
Default in Printer Mode
Default in Printer Mode
Adjustment
1349