Ricoh MP C6502SP Field Service Manual page 1238

5. Troubleshooting
SC No.
SC725-33
1236
Level Error Name/Error Condition/Major Cause/Solution
Jogger Fence Motor Error (D615)
• When moving to the home position, home position was not detected
within specified number of pulses (p0 pulses). (The first time: jam
display, the second time: SC)
• When moving from the home position, home position was still
detected after specified number of pulses (p1 pulses). (The first time:
jam display, the second time: SC)
• Motor driver detected an error. (SC from the first time)
B
• Overcurrent to the motor.
• Motor drive overheat
• Connector disconnected
• Replace the controller board.
• Replace the motor.
• Replace the harness.
• Re-connect the connector.
• Replace the sensor.