Ricoh MP C6502SP Field Service Manual page 1492

5. Troubleshooting
Action
If SC515-01 is observed before the machine reaches 10K since installation, do the following
procedure to age the duplex transport roller/duplex exit roller.
1. Pull out the drawer unit and open the duplex unit lower guide plate.
2. Slide the idle rollers of duplex transport rollers [C] and [D] with your fingers toward the front
side of the machine as far as they go.
• Make sure to grip the edge of the rollers, not the surface.
3. Slide the drive rollers of duplex transport rollers [A] and [B] with your fingers toward the front
side of the machine as far as they go.
• Make sure to grip the edge of the rollers, not the surface.
[A]: Duplex transport roller 2 (drive)
[B]: Duplex transport roller 3 (drive)
[C]: Duplex transport roller 2 (idle)
[D]: Duplex transport roller 3 (idle)
4. Close the duplex unit lower guide plate and push the drawer unit back into the machine.
1490