Ricoh MP C6502SP Field Service Manual page 1368

Hide thumbs Also See for MP C6502SP:

Table of Contents

5. Troubleshooting

• Blisters on coated paper

• Reduced gloss

2. Make 50 copies in A4/LT SEF and check the results.

3. If the results are unsatisfactory, set the process speed to "Low" in the SP mode or IMSS.

IMSS setting #15:

Process Speed

4. For the process speed adjustment to take effect, turn the machine power OFF and then ON.

Adjustments Required for Improved Glossiness (MP C8002SP/MP C6502SP)

1. In [Tray Paper Settings] – [Paper Type], select [Coated Paper (Glossy)].

• This will increase the temperature of fusing roller but will also slow down the processing speed.

Adjustment 008: Margin Adjustment

Procedure for adjusting the leading edge margin [A] and trailing edge margin [B] is described below.

"3" (default: 0)

Paper thickness 1 to 5: "1" (default: 0)

Paper thickness 6: "3" (default: 1)

Chapters

Table of Contents