Pressure Roller Stripper Plate - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

4. Replacement and Adjustment

Detach the hot roller [A] and the heating roller [B] from the fusing belt [C].

• When you detach the rollers and the belt from the frame, hold the ends of the hot roller shaft

to lift it. Then move it above the heating roller to detach the whole thing (hot/heating rollers

and fusing belt).

Pressure Roller Stripper Plate

Separate the fusing unit into the upper part and the lower part

Pressure Roller Stripper Guide Plate [A] (C x2, B x1)

• See the picture below to make sure which screw is used in which location.

• [A]:B (HEXAGONAL BOLT:W/WASHER:M3X8), Others: C (STEPPED SCREW:M3)

(page 785 "Separating the

Table of Contents