Laser Unit Cooling Fan (Left / Right) - Ricoh MP C6502SP Field Service Manual

• During the download of the correction values, you can turn off the power, or open the door.
• If an SC or a display of "failure" occurs, you can run the download again after turning the
power OFF and ON.
3. Correct the color registration with the User Tools.
[User Tools/Counter/Inquiry]-[Management]-[Color Registration]-[OK]
4. If necessary, adjust the registration, skew, and magnification. For information about how to adjust,
refer to Adjustment in Troubleshooting. (

Laser Unit Cooling Fan (Left / Right)

1. Laser unit ( page 672)
• Remove the laser unit cooling fan (left) after removing the laser unit (YM).
• Remove the laser unit cooling fan (right) after removing the laser unit (CK).
2. For the laser unit cooling fan (left), first, remove the cover [A] ( x 2), and then remove the clamp
of the cooling fan cord.
3. Laser unit cooling fan along with the bracket ( x 2,
e.g.: Left
page 1347 "Adjustment")
x 1, x 1)
Laser Unit
677