5. Troubleshooting
SC No.
SC725-13
SC No.
SC725-14
1232
Level
Error Name/Error Condition/Major Cause/Solution
Dynamic Roller Transport Motor Error (D615)
• Motor driver detected an error. (SC from the first time)
• Overcurrent to the motor.
B
• Motor drive overheat
• Replace the controller board.
• Replace the motor.
• Replace the harness.
Level
Error Name/Error Condition/Major Cause/Solution
Z-fold top tray exit motor error (D615)
• Motor driver detected an error. (SC from the first time)
• Overcurrent to the motor.
B
• Motor drive overheat
• Replace the controller board.
• Replace the motor.
• Replace the harness.