Lubrication After Replacement - Ricoh MP C6502SP Field Service Manual

4. Replacement and Adjustment
• After the replacement, some procedures need to be done. See "Lubrication after
replacement" described below.

Lubrication after replacement

1. Turn on the machine.
2. Enter the SP mode and push the PM parts counter reset button in the PM Parts display.
3. Replace Image Transfer Belt.
4. Attach the toner hopper unit.
• Do not install the belt cleaning fan yet.
5. Attach drawer unit cover.
6. Rotate the blade release lever to move the cleaning blade away from the ITB.
7. Pull out (open) the drawer unit.
724