Ricoh MP C6502SP Field Service Manual page 1227

SC No. Level
SC722-39 B
SC No. Level
SC722-40 B
Error Name/Error Condition/Major Cause/Solution
Stapler Movement Motor Error (D707)
• When moving to the home position, home position was not detected
within specified time (t0 ms). (The first time: jam display, the second
time: SC)
• When moving from the home position, home position was still
detected after specified time (t1 ms). (The first time: jam display, the
second time: SC)
• Motor defective
• Connecter disconnected
• Overload
• Home position sensor defective
• Check the connections of the motor and home position sensor.
• Replace the motor/home position sensor.
• Replace the PCB.
Error Name/Error Condition/Major Cause/Solution
Stapler Rotation Motor Error (D707)
• When moving to the home position, home position was not detected
within specified time (t0 ms). (The first time: jam display, the second
time: SC)
• When moving from the home position, home position was still
detected after specified time (t1 ms). (The first time: jam display, the
second time: SC)
• Motor defective
• Connecter disconnected
• Overload
• Home position sensor defective
• Check the connections of the motor and home position sensor.
• Replace the motor/home position sensor.
• Replace the PCB.
Service Call 700-780
1225