Ricoh MP C6502SP Field Service Manual page 1357

Step Output ID
K Highlight
5
(K/C/M/Y)
Adjustment 003: Scanner Registration
Overview
Scanning registration can be adjusted in the Main Scan and Sub Scan directions. Sub Scan
Magnification can also be adjusted.
Adjustment Procedure
Adjustment can be performed by the following SPs. (
Adjustment")
• SP4-011-001 (Main Scan Reg.): Registration in the Main Scan direction.
• SP4-010-001 (Sub Scan Registration Adj): Registration in the Sub Scan direction.
• SP4-008-001 (Sub Scan Magnification Adj): Magnification in the Sub Scan direction.
Adjustment 004: ADF Registration
Overview
Adjust the position and scaling applied to scanned images when using the ADF with the copier and
scanner functions. By specifying this setting, you can correct image misalignment, expansion, and
shrinkage due to non-uniform paper feeding.
This adjustment needs to be done before doing "Adjustment 005: Registration Adjustment"
C-4 chart level
1 2 3 4 5 6
Adjustment Reference
Adjust the 'Offset' value so that
1
black scale levels 3 through 5
7 8 9
0
in the copy are seen as gray
(no C, M, or Y should be
visible). If the black scale
contains C, M, or Y, redo step
1 to 4.
- Only in Photo mode -
page 669 "Magnification and Registration
Adjustment
1355