Ricoh MP C6502SP Field Service Manual page 1304

5. Troubleshooting
SC No.
SC867-02
SC No.
SC868-00
* Do not format an SD card supplied with the main machine or sold as an option. You may only format SD
cards used for Firmware Update by a Customer Engineer.
1302
Level Error Name/Error Condition/Major Cause/Solution
SD card removed
The SD card that starts an application was removed from the slot.
D
The SD card that starts an application was removed from the slot (mount
point of /mnt/sd2).
Turn the main power off/on.
Level Error Name/Error Condition/Major Cause/Solution
SD card access error
The SD controller returned an error during operation.
(Error occurred at the mount point of /mnt/sd0)
• SD card defective
• SD controller defective
D
• Reformat the SD card (using the "SD Formatter" made by
Panasonic).*
• Check the SD card insertion status.
• Replace the SD card.
• Replace the controller board.