Ricoh MP C6502SP Field Service Manual page 1231

SC No. Level
SC722-72 B
SC No. Level
SC722-74 B
Error Name/Error Condition/Major Cause/Solution
Shift Jogger Motor Error (D707)
• When moving to the home position, home position was not detected
within specified number of pulses (p0 pulses). (The first time: jam
display, the second time: SC)
• When moving from the home position, home position was still
detected after specified number of pulses (p1 pulses). (The first time:
jam display, the second time: SC)
• Overload due to staple jam or number of sheets exceeding the limit,
etc.
• Motor defective
• Connecter disconnected
• Home position sensor defective
• Check the connections of the motor and home position sensor.
• Replace the motor/home position sensor.
• Replace the PCB.
Error Name/Error Condition/Major Cause/Solution
Shift Jogger Lift Motor Error (D707)
• When moving to the home position, home position was not detected
within specified number of pulses (p0 pulses). (The first time: jam
display, the second time: SC)
• When moving from the home position, home position was still
detected after specified number of pulses (p1 pulses). (The first time:
jam display, the second time: SC)
• Overload due to staple jam or number of sheets exceeding the limit,
etc.
• Motor defective
• Connecter disconnected
• Home position sensor defective
• Check the connections of the motor and home position sensor.
• Replace the motor/home position sensor.
• Replace the PCB.
Service Call 700-780
1229