Ricoh MP C6502SP Field Service Manual page 1462

Hide thumbs Also See for MP C6502SP:

Table of Contents

5. Troubleshooting

Toner fused on the paper is not completely dried.

Activate the Cooling Fan included as an accessory to the Copy Tray Type M2.

If the above does not resolve the problem, set the cooling fan in the procedure described on the

following pages so that it faces in a 90° angle.

1. Remove bracket [A] from bracket [B]. ( x 2)

2. Do the same on the other side. ( x 2)

• Work carefully to avoid dropping the unit.

Chapters

Table of Contents