Ricoh MP C6502SP Field Service Manual page 1399

[A]: Duplex Transport guide plate (Upper) (Clean the turning point on the right intensively.)
[B]: Duplex Transport guide plate (Lower)
Action (detail 3): Lower the fusing temperature.
Enter SP mode and lower the fusing temperature with SP1-984. (Guideline: Lower it 10° C at a
time.)
• There is a risk of decreasing fusing ability. Be sure to check the printed results.
Pro/Office
Pro/Office SP1-984-109 to 254
Pro/Office
Pro 74 (SP1-984-001 to
100)
Reference
Following are features unique to the CH-C1 series that contribute to the vertical streaks.
• Chances of foreign materials to scratch the prints are high because the toner used for the
Charis series has a low melting point.
• Paper contacts the guide plate after fusing because the curve of the switchback exit path is
tight.
Curvature Ave R35
SP No.
Htg Roller Temp Setting
No.
Fusing Heat Roller
Temperature Adjustment
MPC7501/6501
Ave R50
SP Name
0 to 200
IMSS setting
0 to 200
ProC5100S/5110S
Image Quality
Value
Value
ProC751EX/651EX
Ave R70
1397