Part 2: Developer Removal Procedure - Ricoh MP C6502SP Field Service Manual

• Changed value "0" supplies toner in constant supply mode.
Table 3-2 Toner Supply Rate
SP No.
SP 3-440-001
SP 3-440-002
SP 3-440-003
SP 3-440-004
4. Select test pattern "26" from SP2-109-003 and specify the color in SP2-109-005.
Table 4 Test Pattern Settings
SP No.
SP 2-109-003
SP 2-109-005
5. Print the test pattern on A4/LT or A3/DLT for the volume determined in step 2.
6. Check the latest toner density in SP3-200-001 to 004. (Table 1)
7. Repeat steps 1 to 5 until you achieve the standard toner density 7%±0.5.
8. Set the SP settings for toner supply mode and supply rate (changed in step 3) back to the default
values; "4" for toner supply mode and "5%" for supply rate.
• Make sure to set the toner supply mode and supply rate carry back to default. Otherwise,
image density will appear light.
9. Continue with the procedures described in "Part 2".

PART 2: Developer Removal Procedure

1. Development unit (
2. Take out the old developer from the supply port [A] into the plastic bag that came with the new
developer.
Color
K
C
M
Y
Settings
26
Specify color
page 702)
Default Change to
5
5
5
5
Solid
Development Unit
0
0
0
0
707