5. Troubleshooting
Solution
1. Check the paper size fixed with the end fence on the tandem tray.
Photo below describes an example of the end fence fixed to 8
2. Check the paper size specified for the tandem tray on the control panel.
3. If the sizes do not match, enter SP5-959-001; Paper Size: 1st Tray (Tandem) and specify the
size according to the paper in use.
0: A4 LEF
1
1: 8
/
2
4. Turn the main power off/on.
5. Confirm proper duplex printing to complete the procedure.
Troubleshooting SC 570-00 (fusing belt smoothing roller error)
Symptom
SC570-00 (fusing belt smoothing roller operation error)
1486
× 11 LEF
1
/
size.
2