Ricoh MP C6502SP Field Service Manual page 1370

5. Troubleshooting
Trailing edge margin adjustment
Pro/Office
Pro/Office
Pro
Pro/Office
Pro
• Adjust this SP in increments of ±0.5mm. Higher values will increase the margin, while lower
values will decrease the margin.
2. Make some test prints (simplex and duplex) and make sure that fusing jams and side edge smudges
do not occur.
Adjustment 009: Staple misalignment (3 mm or more) occurs
Symptom
Staple misalignment (3mm or more) occurs.
Sample:
1368
SP No.
SP2-123-201 to 254 [Erase Margin Adj Trailing
Edge] (for each paper type/
thickness)
SP2-123-001 to 100 [Erase Margin Adj Trailing
Edge] (for each custom paper)
IMSS setting No.
11 Adjust Erase Margin of Trailing
Edge (for each custom paper)
SP Name
-3 to 6mm
-3 to 6mm
IMSS setting
-3 to 6mm
Value
Value