Ricoh MP C6502SP Field Service Manual page 1359

Step 3. Image Adjustment for front.
Step 4. Image Adjustment for back.
Step 5. Adjustment of magnification for back.
Step 1. Side fence check
Check the side fence status for each paper tray. If not correct, adjust the trays.
Step 2. Skew Adjustment for front and back.
Step 2-1 Set A3 or DLT plain paper (63.1-80.0 gsm) in Tray 2 and apply the paper tray settings.
Step 2-2 Print 5 copies of the test pattern Trimming Area (SP2109-003-14) in b/w and simplex.
Step 2-3 Measure the two locations [A] and [B] on all 5 copies.
Step 2-4 You need to make an adjustment with SP1-004-001 so that the average values of [A]
and [B] are the same.
Front Side (1st Side)
*The arrow indicates the paper feed direction
Step 2-5 Make another 5 copies, this time in duplex.
Step 2-6 Measure the locations [C] and [D] on the back side.
Step 2-7 You need to make an adjustment with SP1-004-003 so that the average values of [C] and [D]
are the same.
Adjustment
1357