5. Troubleshooting
3. Set the screw removed in the previous step to the hole in the front most position for both
operator and non-operator sides. DO NOT fully fasten the screws yet.
4. Fully fasten the screws to complete the procedure.
Troubleshooting for Random Pitch Banding Caused by Lubricant Falling from the
Drum Cleaning Unit
Symptom
Banding appears on the printouts at random intervals/pitch.
Cause
The lubricant in the drum cleaning unit falls into the registration unit and creates smudges on the ITB
encoder sensor. As a result, the engine speed cannot be controlled correctly.
Solution
Clean the ITB encoder with a blower brush.
1454