Ricoh MP C6502SP Field Service Manual page 1257

SC No. Level
SC819-00 D
SC No. Level
SC840-00 D
Error Name/Error Condition/Major Cause/Solution
Fatal kernel error
Due to a control error, a RAM overflow occurred during system
processing. One of the following messages was displayed on the
operation panel.
0x5032 HAIC-P2 error
0x5245 Link-up fail
0x5355 L2 Status Time Out
0x696e gwinit died
0x766d Vm_pageout: VM is full
554C USB loader defect
Other Other error
• System program defective
• Controller board defective
• Optional board defective
• Replace controller firmware
Error Name/Error Condition/Major Cause/Solution
EEPROM access error
An error occurred during I/O processing.
• A read error occurred and 3 retries failed.
• A write error occurred.
EEPROM defective or end-of-life
-
Service Call 816-899
1255