SC No.
Level
SC550-01
D
Error Name/Error Condition/Major Cause/Solution
Refresh roller drive motor: Lock
The IOB detects the fusing motor lock error (rotation speed out of
specification).
Vodka assignment: GPIO28DATA[7]
Details:
When the motor is on, each lock signal is checked every 100
milliseconds. If the High status is detected 20 times consecutively, the
machine determines that the motor is not running correctly. The machine
issues an SC and stops the motor.
• Motor defective
• Connecter disconnected
• Harness broken
• IOB defective
• Unit torque increased.
• Replace the motor.
• Reconnect the connector.
• Replace the harness.
• Replace the IOB.
• Replace the unit.
• Replace the driven unit.
Service Call 501-595
1139