Lubrication After Replacement - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

Install the new cleaning brush roller and then use a brush to apply zinc stearate

(D0149501) and yellow toner (D0149500) in a 40 ~ 50 mm area (shown below) of the

installed cleaning brush roller.

• Use the blower brush (D0747690) when applying zinc stearate and yellow toner to the

cleaning brush roller.

Lubrication after Replacement

After the replacement of the ITB cleaning unit or its components (ITB cleaning blade / Lubricant bar /

ITB lubricant blade), you should follow these steps below to lubricate:

Rotate the blade release lever to move the cleaning blade away from the ITB.

Turn on the machine, while keeping the drawer unit withdrawn.

Enter the SP mode and choose "SP2-696-001 (Force Apply Lubricant Execute).

Push [Execute] on the operation panel and then push the drawer unit into the machine.

ITB Cleaning Unit

Table of Contents