Ricoh MP C6502SP Field Service Manual page 1153

SC No.
SC569-04
SC570
SC No.
D137 RTB 116
SC570-00
Level Error Name/Error Condition/Major Cause/Solution
Pressure Release Error: Overrun
When "Sensor A: Low" is not detected within 1000 msec from the start of
pressure application.
Monitored when the pressure release mechanism is operating.
Pressure Change: SP1-151-001 1:On/0: Off
When this SP is set to OFF, SC detection is disabled.
D • Pressure release motor, sensor defective
• Feeler deformed or damaged
• Pressure release mechanism defective
• Replace the motor.
• Replace the sensor.
• Replace the feeler.
• Replace the unit.
Level Error Name/Error Condition/Major Cause/Solution
Refresh Roller Contact Error
Contact/separation/control failed 3 times consecutively.
Monitored when the contact/separation mechanism is operating.
• Refresh roller contact motor, sensor defective
• Feeler deformed or damaged
D
• Contact/separation mechanism defective
• Replace the motor.
• Replace the sensor.
• Replace the feeler.
• Replace the unit.
Service Call 501-595
1151