Subaru Legacy 2005 Service Manual page 1749

16.Diagnostics for Engine Starting Failure
A: PROCEDURE
1. Check for fuel amount.
2. Inspection of starter motor circuit. <Ref. to EN(H6DO)(diag)-54, STARTER MOTOR CIRCUIT, Diagnostics for Engine Starting
Failure.>
3. Inspection of ECM power supply and ground line. <Ref. to EN(H6DO)(diag)-57, CHECK POWER SUPPLY AND GROUND
LINE OF ENGINE CONTROL MODULE (ECM), Diagnostics for Engine Starting Failure.>
4. Inspection of ignition control system. <Ref. to EN(H6DO)(diag)-60, IGNITION CONTROL SYSTEM, Diagnostics for Engine
Starting Failure.>
5. Inspection of fuel pump circuit. <Ref. to EN(H6DO)(diag)-62, FUEL PUMP CIRCUIT, Diagnostics for Engine Starting Failure.>
6. Inspection of fuel injector circuit. <Ref. to EN(H6DO)(diag)-64, FUEL INJECTOR CIRCUIT, Diagnostics for Engine Starting Fail-
ure.>
Diagnostics for Engine Starting Failure
EN(H6DO)(diag)-53
↓
↓
↓
↓
↓
ENGINE (DIAGNOSTICS)