Table of Contents
Advertisement
Manifold Absolute Pressure Sensor
FUEL INJECTION (FUEL SYSTEMS)
9. Manifold Absolute Pressure
Sensor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
IN-00203
3) Disconnect the connector from manifold pres-
sure sensor (A), and remove the filter assembly (B)
from intake manifold.
(B)
(A)
FU-02131
4) Remove the manifold absolute pressure sensor
from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
6.4 N
m (0.65 kgf-m, 4.7 ft-lb)
FU(H6DO)-23
Advertisement
Chapters
Table of Contents
