Subaru Legacy 2005 Service Manual page 1605

27) Install the flywheel. <Ref. to CL-21, INSTALLA-
TION, Flywheel.>
28) Install the clutch disc and cover. <Ref. to CL-
16, INSTALLATION, Clutch Disc and Cover.>
29) Install the drive plate using ST. (AT model)
ST1 498497100 CRANKSHAFT STOPPER
ST2 499057000 TORX PLUS
Tightening torque:
⋅
81 N m (8.3 kgf-m, 60 ft-lb)
C: DISASSEMBLY
(3)
(4)
(5)
(1) Connecting rod cap
(2) Connecting rod bearing
Cylinder Block
®
ST
ME-00557
(6)
(1)
(2)
(3) Top ring
(4) Second ring
ME(H6DO)-71
30) Install the cylinder head. <Ref. to ME(H6DO)-
60, INSTALLATION, Cylinder Head.>
31) Install the camshaft. <Ref. to ME(H6DO)-57,
INSTALLATION, Camshaft.>
32) Install the rear
ME(H6DO)-54, INSTALLATION, Rear Chain Cov-
er.>
33) Install the crank sprocket.
<Ref. to ME(H6DO)-53, INSTALLATION, Crank
Sprocket.>
34) Install the cam sprocket. <Ref. to ME(H6DO)-
52, INSTALLATION, Cam Sprocket.>
35) Install the timing chain assembly.
<Ref. to ME(H6DO)-48, INSTALLATION, Timing
Chain Assembly.>
36) Install the front chain cover.
<Ref. to ME(H6DO)-45, INSTALLATION, Front
Chain Cover.>
37) Install the crank pulley.
<Ref. to ME(H6DO)-44, INSTALLATION, Crank
Pulley.>
(2)
(1)
(2)
(5)
(6)
MECHANICAL
chain cover. <Ref.
(5)
(4)
(6)
ME-02097
Oil ring
Snap ring
to
(3)