2. Throttle Body
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the air intake chamber. <Ref. to
IN(H6DO)-7, REMOVAL, Air Intake Chamber.>
4) Disconnect the connector from the throttle posi-
tion sensor.
5) Disconnect the engine coolant hoses (A) from
throttle body.
6) Remove the bolts (B) which secure throttle body
to intake manifold.
(A)
(B)
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new O-ring.
Tightening torque:
⋅
8 N
m (0.8 kgf-m, 5.9 ft-lb)
Throttle Body
IN-00203
FU-02111
(B)
(A)
FU-02112
FU(H6DO)-11
FUEL INJECTION (FUEL SYSTEMS)