Table of Contents
Advertisement
7. Oil Pressure Switch
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Disconnect the terminal from oil pressure switch.
6) Remove the oil pressure switch.
Oil Pressure Switch
B: INSTALLATION
1) Apply liquid gasket to the oil pressure switch
threads.
Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or
equivalent
IN-00203
2) Install the oil pressure switch.
Tightening torque:
25 N
LU-00127
3) Connect the terminal of oil pressure switch.
LU-00128
4) Install the under cover.
C: INSPECTION
Check that no oil is leaking or seeping from where
the oil pressure switch is installed.
LU(H6DO)-13
⋅
m (2.5 kgf-m, 18.4 ft-lb)
LUBRICATION
LU-00129
LU-00128
LU-00127
Advertisement
Chapters
Table of Contents
