Subaru Legacy 2005 Service Manual page 1577

12.Preparation for Overhaul
A: REMOVAL
1) Remove the engine
ME(H6DO)-34, REMOVAL, Engine Assembly.>
2) Set the engine on ST.
ST 18232AA000 ENGINE STAND
ST
3) Before servicing overhaul, remove the sensor,
pipe and hose that installed to engine.
(1) Remove the intake manifold. <Ref. to
FU(H6DO)-12, REMOVAL, Intake Manifold.>
(2) Remove the generator. <Ref. to SC(H4SO
2.0)-14, REMOVAL, Generator.>
(3) Remove the A/C compressor. <Ref. to AC-
34, REMOVAL, Compressor.>
(4) Disconnect the water pipe and hose.
(5) Disconnect the engine harness.
(6) Remove the spark plug. <Ref. to IG(H6DO)-
4, REMOVAL, Spark Plug.>
(7) Remove the camshaft position sensor.
<Ref. to FU(H6DO)-20, REMOVAL, Camshaft
Position Sensor.>
(8) Remove the crankshaft position sensor.
<Ref. to FU(H6DO)-19, REMOVAL, Crankshaft
Position Sensor.>
(9) Remove the knock sensor. <Ref. to
FU(H6DO)-21, REMOVAL, Knock Sensor.>
(10)Remove the engine coolant temperature
sensor. <Ref. to FU(H6DO)-18, REMOVAL, En-
gine Coolant Temperature Sensor.>
(11)Remove the oil pressure switch. <Ref. to
LU(H6DO)-13, REMOVAL,
Switch.>
(12)Remove the oil filter. <Ref. to LU(H6DO)-14,
REMOVAL, Engine Oil Filter.>
(13)Remove the oil cooler. <Ref. to LU(H6DO)-
15, REMOVAL, Engine Oil Cooler.>
Preparation for Overhaul
assembly. <Ref. to
ME-02448
Oil Pressure
ME(H6DO)-43
MECHANICAL