Table of Contents
Advertisement
10) Separate the front exhaust pipe (RH) from front
exhaust pipe assembly.
11) Remove the front oxygen (A/F) sensor and rear
oxygen sensor. <Ref. to FU(H6DO)-30, REMOV-
AL, Front Oxygen (A/F) Sensor.> <Ref. to
FU(H6DO)-32, REMOVAL, Rear Oxygen Sensor.>
B: INSTALLATION
1) Install the front oxygen (A/F) sensor and rear ox-
ygen sensor. <Ref. to FU(H6DO)-30, INSTALLA-
TION, Front Oxygen (A/F) Sensor.> <Ref. to
FU(H6DO)-32, INSTALLATION, Rear Oxygen
Sensor.>
2) Install the front exhaust pipe (RH) to front ex-
haust pipe assembly.
NOTE:
Use a new gasket.
Tightening torque:
⋅
30 N
m (3.1 kgf-m, 22.4 ft-lb)
3) Install the front exhaust pipe assembly to vehi-
cle.
4) Temporarily tighten the nuts which hold front ex-
haust pipe assembly to cylinder heads.
Front Exhaust Pipe
5) Install the front exhaust pipe assembly to rear
exhaust pipe.
NOTE:
Use a new gasket.
Tightening torque:
18 N
EX-02017
6) Tighten the bolts which hold front exhaust pipe
assembly to hanger bracket.
Tightening torque:
35 N
7) Tighten the nuts which hold front exhaust pipe
assembly to cylinder heads.
NOTE:
Use a new gasket.
Tightening torque:
30 N
EX-02017
EX-02016
EX(H6DO)-5
⋅
m (1.8 kgf-m, 13.0 ft-lb)
⋅
m (3.6 kgf-m, 26.0 ft-lb)
⋅
m (3.1 kgf-m, 22.4 ft-lb)
EXHAUST
EX-02015
EX-00061
EX-02016
Advertisement
Chapters
Table of Contents
