Subaru Legacy 2005 Service Manual page 1485

Oil Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)
14.Oil Temperature Sensor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
IN-00203
3) Remove the air intake chamber. <Ref. to
IN(H6DO)-7, REMOVAL, Air Intake Chamber.>
4) Disconnect the connector from oil temperature
sensor.
5) Remove the oil temperature sensor.
FU-02138
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
18 N m (1.8 kgf-m, 13 ft-lb)
FU(H6DO)-29