Table of Contents
Advertisement
COOLING
(1)
Radiator lower bracket
(2)
Radiator lower cushion
(3)
Engine coolant drain cock
(4)
Radiator
(5)
Radiator upper bracket
(6)
Radiator upper cushion
(7)
Clamp
(8)
Radiator inlet hose A
(9)
Clamp
(10)
Radiator inlet hose B
(11)
Radiator outlet hose
(12)
Radiator sub fan
(13)
Radiator sub fan motor
(14)
Radiator sub fan shroud
(15)
Radiator main fan
(16)
Radiator main fan motor
C: CAUTION
• Wear work clothing, including a cap, protective
goggles and protective shoes during operation.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure.Avoid unnecessary remov-
al, installation, disassembly and replacement.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before disconnecting connectors of sensors or
units, be sure to disconnect the ground cable from
battery.
General Description
(17)
Radiator main fan shroud
(18)
Engine coolant reservoir tank cap
(19)
Over flow hose
(20)
Engine coolant reservoir tank
(21)
ATF hose clamp
(22)
ATF hose A (Model without ATF
warmer)
(23)
ATF hose B (Model without ATF
warmer)
(24)
ATF pipe (Model without ATF
warmer)
(25)
ATF hose C (Model without ATF
warmer)
(26)
ATF hose D (Model without ATF
warmer)
(27)
Radiator fan control unit
CO(H6DO)-6
(28)
ATF hose A (Model with ATF
warmer)
(29)
ATF hose B (Model with ATF
warmer)
(30)
ATF pipe (Model with ATF warmer)
⋅
Tightening torque: N
m (kgf-m, ft-lb)
T1: 3.8 (0.39, 2.8)
T2: 5.4 (0.55, 4)
T3: 6.2 (0.63, 4.6)
T4: 7.5 (0.76, 5.5)
T5: 12 (1.2, 8.9)
Advertisement
Chapters
Table of Contents
