Subaru Legacy 2005 Service Manual page 1564

Hide thumbs Also See for Legacy 2005:
Table of Contents

Advertisement

MECHANICAL
6) Select a shim of suitable thickness from the fol-
lowing table using the measured valve clearance
and shim thickness.
S = (V + T) − 0.20
S: Required shim thickness
V: Measured valve clearance
T: Shim thickness to be used
Part No.
13218AK890
13218AK900
13218AK910
13218AK920
13218AK930
13218AK940
13218AK950
13218AK960
13218AK970
13218AK980
13218AK990
13218AL000
13218AL010
13218AL020
13218AL030
13218AL040
13218AL050
13218AL060
13218AL070
13218AL080
13218AL090
13218AL100
13218AL110
13218AL120
13218AL130
13218AL140
13218AL150
13218AL160
13218AL170
13218AL180
13218AL190
13218AL200
13218AL210
13218AL220
13218AL230
13218AL240
13218AL250
13218AL260
13218AL270
13218AL280
13218AL290
13218AL300
Valve Clearance
Unit: (mm)
Thickness mm (in)
1.92 (0.0756)
1.94 (0.0764)
1.96 (0.0772)
1.98 (0.0780)
2.00 (0.0787)
2.02 (0.0795)
2.04 (0.0803)
2.06 (0.0811)
2.07 (0.0815)
2.08 (0.0819)
2.09 (0.0823)
2.10 (0.0827)
2.11 (0.0831)
2.12 (0.0835)
2.13 (0.0839)
2.14 (0.0843)
2.15 (0.0846)
2.16 (0.0850)
2.17 (0.0854)
2.18 (0.0858)
2.19 (0.0862)
2.20 (0.0866)
2.21 (0.0870)
2.22 (0.0874)
2.23 (0.0878)
2.24 (0.0882)
2.25 (0.0886)
2.26 (0.0890)
2.27 (0.0894)
2.28 (0.0898)
2.29 (0.0902)
2.30 (0.0906)
2.31 (0.0909)
2.32 (0.0913)
2.33 (0.0917)
2.34 (0.0921)
2.35 (0.0925)
2.36 (0.0929)
2.37 (0.0933)
2.38 (0.0937)
2.39 (0.0941)
2.40 (0.0945)
ME(H6DO)-30
Part No.
13218AL310
13218AL320
13218AL330
13218AL340
13218AL350
13218AL360
13218AL370
13218AL380
13218AL390
13218AL400
13218AL410
13218AL420
13218AL430
13218AL440
13218AL450
13218AL460
13218AL470
13218AL480
13218AL490
13218AL500
13218AL510
13218AL520
13218AL530
13218AL540
13218AL550
13218AL560
13218AL570
13218AL580
13218AL590
2. EXHAUST SIDE
CAUTION:
• Adjustment of valve clearance should be per-
formed while engine is cold.
• Do not wear gloves during removal and in-
stallation of valve lifter.
• Do not use the valve lifter which got high im-
pact due to drop, etc.
1) Measure all valve clearances.
<Ref. to ME(H6DO)-28, INSPECTION, Valve
Clearance.>
NOTE:
Record each valve clearance after it has been
measured.
2) Remove the camshaft. <Ref. to ME(H6DO)-56,
REMOVAL, Camshaft.>
3) Remove the valve lifter.
Thickness mm (in)
2.41 (0.0949)
2.42 (0.0953)
2.43 (0.0957)
2.44 (0.0961)
2.45 (0.0965)
2.46 (0.0969)
2.47 (0.0972)
2.48 (0.0976)
2.49 (0.0980)
2.50 (0.0984)
2.51 (0.0988)
2.52 (0.0992)
2.53 (0.0996)
2.54 (0.1000)
2.55 (0.1004)
2.56 (0.1008)
2.57 (0.1012)
2.58 (0.1016)
2.59 (0.1020)
2.60 (0.1024)
2.61 (0.1028)
2.62 (0.1032)
2.64 (0.1039)
2.66 (0.1047)
2.68 (0.1055)
2.70 (0.1063)
2.72 (0.1071)
2.74 (0.1079)
2.76 (0.1087)

Advertisement

Table of Contents
loading

Table of Contents