Subaru Legacy 2005 Service Manual page 1637

Hide thumbs Also See for Legacy 2005:

Table of Contents

1) Separate the muffler from rear exhaust pipe.

Be careful, because the exhaust pipe is hot.

2) Apply a coat of spray type lubricant to the mating

area of cushion rubber.

3) Remove the front and rear cushion rubber, and

then remove the muffler.

B: INSTALLATION

Install in the reverse order of removal.

Use a new gasket and self-locking nut.

Tightening torque:

C: INSPECTION

1) Check the connections and welds for exhaust

2) Check for hole or rust.

3) Check the cushion rubber for wear or crack.

m (4.9 kgf-m, 35.4 ft-lb)

Chapters

Table of Contents